Power over Fibre

We all know the current NBN Network has many problems, One of the biggest is no power no Phone or the Internet. NBNCALLING HD VoIP has already started to address this major problem and as you can see there is a solution.

Power over Fibre

 

Definition: delivery of power for electronic devices via light in an optical fibre

German: Leistungsübertragung über Glasfasern

Categoryfibre optics and waveguides

How to cite the articlesuggest additional literature

Optical fibre cables can be used for transmitting optical power from a source to some application. The term power over fiber or photonic power implies that the optical power is generated from electric power with a laser diode and at the end converted back to electrical power for some electronic device. That conversion can be done with a photovoltaic cell, i.e., a semiconductor device based on a material such as gallium arsenide, indium phosphide, or indium gallium arsenide. A typical system contains a laser diode emitting a few watts of optical power, a multimode fibre of a few hundred meters length, and a photovoltaic cell with an active area of several square millimeters.

Although an insulated copper wire is a simpler technology for transferring electric power, power over fiber offers advantages in specific situations:

  • Non-conducting fibre cables (based on glass fibers or plastic fibers) can be installed where high electric voltages exist. For example, a fiber can transmit power for a current transducer in a high-voltage transmission line. Such current sensors with an optical power isolator can replace bulky transformer systems.
  • The insulating property is also useful when a device (e.g. some radio signal receiver) is connected to an antenna, which could be hit by lightning. There is then no risk that the lightning is transmitted via the cable.
  • Optical delivery of power avoids any sensitivity to strong magnetic fields (e.g. in magnetic resonance imaging) and to electromagnetic interference. Conversely, no electromagnetic radiation can be emitted, which might disturb other devices.
  • There is no risk that explosive materials (e.g. in a fuel tank of an airplane) can be ignited, as could occur e.g. via an electric spark.
  • In a system for optical fibre communications, there may be spare fibers which can be used for transmitting power when an electrical connection does not exist.
  • A fiber can have a far lower weight than an electrical cable and may tolerate higher temperatures.
  • The same fiber may be used to send back data e.g. from a sensor, using some other wavelength channel.

Therefore, a number of applications can be envisaged in areas such as industrial sensors, aerospace, and optical communications.

Obvious disadvantages are the cost of optical components and the limited potential in terms of available power and conversion efficiency. There may also be a laser safety issue associated with several watts of optical power, which can leave the fibre when it is broken.

− Choice of Wavelength and Power Efficiency

For short-range transmission, laser diodes emitting around 750–850 nm can be used in combination with GaAs-based photovoltaic cells. The power efficiency of a photovoltaic cell can easily be around 40–50%, i.e. significantly higher than for a normal solar cell because the photon energy of the light is well matched to the bandgap of the photovoltaic cell. The electrical-to-electrical efficiency can then be of the order of 20–30% for systems with a short fibre.

Optical losses in the fiber, mostly due to scattering, limit the transmission distance and power efficiency of the system. Longer transmission distances (possibly several kilometers) can be realized with systems operating at longer optical wavelengths because this drastically reduces Rayleigh scattering.

How do you rate this article?

No products found.

©2017 www.nbncalling.com - All rights reserved.

"NBNCALLING HD VoIP" uses cookies to improve its website. For more details and how to manage cookies, please see our privacy policy.

I accept cookies from this site.